ویژگیهای فنی مدار محافظ شارژ باطری 3 سل
Three series of lithium battery protection board.
Automatically cancel protection after protection conditions restore.
With function of overcharge protection, over discharge protection, short circuit protection, over-current protection.
Suitable for lithium battery pack of 11.1V, 12V, 12.6V.
Quiescent current < 30uA, so power consumption is small.
مدل: HX-3S-01
ابعاد ماژول: 50 x 16 x 1mm
بازه ی افزایش ولتاژ : Over voltage range: 4.25-4.35v±0.05v
بازهی ولتاژ تخله باتری Over discharge voltage range: 2.3-3.0v±0.05v
حداکثر میزان شدت جریان Maximum operating current: 6-8A
Maximum transient current: #1: 9-10A, #2:10-13A
Quiescent current: ＜ 30uA
Internal resistance: ＜ 100mΩ
ولتاژ شارژ Charging voltage: 12.6v – 13V
بازهی دمای کاری Working temperature: -40~+50℃
Storage condition: -40~ +80℃
Effective life: >30000h
لایههای محافظتی Short circuit protection: Yes, delayed self recovery
Higher than 3A current discharge product, the discharge rate of battery discharge is above 3C.
Multiplier calculation formula: 1C battery, 2000 capacity is equal to 2AH * 1 = 2A maximum working current.
3C ratio battery, 2000 capacity is equal to 2AH * 3 = 6A maximum working current.
In the process of use, if the battery heat, the battery power is not applicable. This situation cannot be used for a long time.Otherwise, the battery will soon be damaged.
ادامه مطلبShow less
نظر دهید